First fully ABHA shaped coils!
All devices are for experimental use only!
New: Garuḍa Absolute Abha Vortex Coil © :
ऊन UNIFICATORY-12wheeled-13grooved frame;
98$ +14$ postage
frame dimensions: 17,4cm x 5,5cm
First fully ABHA shaped coil on market!
In photos: smaller POE-unification coil, Rodin-coil, this kind shaped smaller ABHA-coil and this frame. Only this frame included and wires not included. This is just to show the evolution to this coil design. And ofcourse all thanks to 1stopenergies for designing the father of this model!!
Garuḍa Absolute ABHA Vortex Coil©:
ऊन-11 or UNA11; 6 grooved, more vertical vortex coil; only the frame 58$ + 14$ postage
diameters: 128mm x 46mm
This is experimental model, good for example 0.5dim magnet wire, in photos 24x 0.5dim wire, not icluded. Wire is really short compared to other models, you can see it's very sparse.
The computation for GAAV works also other way around, subtracting from circle frames(Garuḍa Absolute Abha: Una (ऊन) Wing© (CC4.0) or in english Minus Wing Vortex coil). To save material and to get more vertical angle to wiring, this way could be preferred. Halving grooves gives new Garuḍa Absolute ABHA Una Wing vertical Vortex coil© (CC4.0).
NOT thermoplast! if one wants it thermo (+35$): firstname.lastname@example.org
2 below ones' are good, most 'normal' or natural, 12 grooved ABHA - shaped coils (for me)
ऊन-11 or UNA11, only the frame 58$ + postage 14$
diameters: 124mm x 38mm
Is very nice most POE-coil like frame, even though this one has 11 wings, that's way it makes the FULL ABHA
in photos 24x0.5dim magnet wire
NOT thermoplast! if one wants it thermo (+30$): email@example.com
3d-printed Garuḍa Absolute ABHA Vortex Coil, 13-winged, high temp. only frame(126,5mm X 38mm)
excluding postage 14$
On this model if 24 wire Litz-type winding used, use at max 0,35dim wire for easiest wind or reduce the number of magnet wires. Another model is coming for heftier wiring. In photos: 0.5dim, 24-wires. Not included.
(:out of stock:) (208$ + postage 30$)
New: Garuḍa Absolute Abha Vortex Coil © !! Known also as GAAV-coil
wholly wired, ready made:129mm X 41mm, 13-winged, 2x12(0.5dim) wired Litz-type winding
All the coils of Garuḍa Taḍit Are Thermoresistant!!
-material of all the coils is Formlabs' High Temp ,The most heat resistant 3d-print material available!
::The most notable property of this material is its Heat Deflection Temperature, which is the temperature at which a material will deform under a specified load. For High Temp, the heat deflection temperature is 289 °C @ 0.45 MPa.::
Which means that the polyamide coating on magnet wires will melt first, at 250°C. So that the coils can be run most efficiently, and maybe efficiency even extended with air- or other type of cooling...
If one wants to buy one of these, please check ebay for GAAV-coil, click the text to go there or then contact me at: firstname.lastname@example.org and one can also pay in XEMs or BTC, and ofcourse bank transfer and paypal.